Adding molding to walls is one of the quickest and most inexpensive ways to add architectural detail to your home. From picture frame moulding to chair rails and everything in between, there are lots of ways to add trim details to your walls that can be as creative or traditional as you like.
You can use wall trim to give your room a more finished look or to add some character to it. Here are some steps to follow in order to achieve the best results. These tips can help you get the most beautiful molding installed in a short time.
1. Hang Drywall Over Plaster
Plaster walls that have been damaged by water or other factors might need to be replastered. You can give your walls a modern, clean look that lasts longer than plaster and also allow you to add new wiring or insulation.
2. Crown Molding Hanging with a Design
It is important that you align all pieces of the molding design if it has one. Start in the corner that is least noticeable and work your ways around the room until you reach the end of the design.
3. You can use construction adhesive to achieve a tight fitting fit
After you have finished hanging the crown molding, apply a small amount of construction adhesive to the back of each piece. Nail each piece into the wall, either directly through the molding or by placing it into studs, depending on how secure you want the piece to be.
4. You can use a Stop-Block Setup to protect your Miter Joints
The key to getting a proper fit with the wall frames is making sure that all the miter joints are the same length. This can be achieved by using a stopblock setup. It holds the miter joint in position and allows you make consistent cuts with straight edges.
5. Make sure to nail each mold in place
Once you've put the wall frames up, you can nail them in with a finish nail gun. Make sure you use nails that are sufficiently long to penetrate the molding and into the wall studs. However, they should not be too long that it blocks your ability to paint over them.
6. Apply a Finish Coat of Paint/Stain
After installing the molding it is important to give it another coat of paint. This will prevent potential wood problems like warping, splitting, or rotting.
It is possible to match the color of your walls with a stain or paint. This will make them blend more easily. You can also save time and effort by painting the molding.
FAQ
What is the cost of renovating a house?
Renovations typically cost anywhere from $5,000 to $50,000. Renovations typically cost homeowners between $10,000 and $20,000
Are permits necessary to renovate my property?
Yes. Before you start any home improvements project, permits are necessary. A building permit and plumbing permit are required in most cases. You may also need a zoning permit depending on the type of construction you are undertaking.
How do you choose a good contractor to work with?
Ask family and friends for referrals when looking for a contractor. Look online reviews as well. Check to make sure the contractor has experience with the type of construction you are looking for. Refer to previous clients and verify their references.
Can I rent a dumpster?
You can rent a dumpster for debris removal after your home renovation. Renting a dumpster will help you keep your yard clear of debris and trash.
Is it cheaper to build a new house or remodel an old one?
There are two options if your goal is to build a new home. The other option is to purchase a prebuilt home. This type of home can be moved in to immediately after it is built. Another option is to build a custom home yourself. To build your dream home, you will need to hire an architect.
How much time and money it takes to design and plan a new house will affect the cost. A custom home may require more effort because you'll likely need to do most of the construction work yourself. But, you also have more control over which materials you choose and where you place them. It might be easier for you to find a contractor who has experience building custom homes.
A new house is generally more expensive than a home that has been renovated. The reason is that you'll need to pay more for the land, as well any improvements. Permits and inspections are also required. On average, the difference in price between a new and remodeled house is $10,000 to $20,000.
Which room should I renovate first?
The heart of any home is the kitchen. It's where most people spend their time cooking, entertaining and relaxing. You can make your kitchen more functional and appealing by using these tips!
The bathroom is an important part of any house. It is a place where you can feel at ease and privacy as you perform daily tasks such as brushing teeth, bathing, shaving, and getting ready for sleep. You can improve the function and appearance of these rooms by adding storage, installing a bathtub instead of a bath, and replacing outdated fixtures with moderner ones.
Statistics
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- They'll usually lend up to 90% of your home's "as-completed" value, but no more than $424,100 in most locales or $636,150 in high-cost areas. (kiplinger.com)
- Rather, allot 10% to 15% for a contingency fund to pay for unexpected construction issues. (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- Design-builders may ask for a down payment of up to 25% or 33% of the job cost, says the NARI. (kiplinger.com)
External Links
How To
How can I plan a complete house remodel?
It takes careful planning and research to plan a complete house remodel. Before you even start your project there are many important things that you need to take into consideration. The first thing you need to decide is what kind of home improvement you want to make. You could choose from different categories such as kitchen, bathroom, bedroom, living room, etc. Once you've decided on which category to work on you will need to calculate how much money is available for your project. If you are new to working in homes, budget at least $5,000 for each room. You might be able get away with less if you have previous experience.
Once you have established how much you are able to afford, you will have to decide on how big a job to do. If you have only enough money to remodel a small kitchen, you may not be able add new flooring, countertops, or paint the walls. If you have the money to do a complete kitchen remodel, you will be able to handle almost anything.
Next, find a contractor that specializes in the project you are interested in. This will guarantee quality results, and it will save you time later. Once you have found a reliable contractor, it is time to start gathering supplies and materials. Depending on the size of your project, you may need to buy everything from scratch. However, there are plenty of stores that sell pre-made items so you shouldn't have too much trouble finding everything you need.
Once you've gathered the supplies needed, it's now time to start planning. Begin by sketching out a rough plan of where furniture and appliances will be placed. Next, design the layout of your rooms. Make sure that you leave space for plumbing and electrical outlets. It is a good idea to place the most important areas nearest the front door. This will make it easier for visitors to access them. Final touches to your design include choosing the right colors and finishes. To save money and keep your budget low, you should stick to neutral tones.
Now it's time for you to start building. Before you begin construction, it's important to check your local codes. Some cities require permits while others allow homeowners to build without one. You will need to first remove all walls and floors that are not required for construction. To protect your flooring, you will lay plywood sheets. Next, you will nail or screw together pieces wood to create the frame for your cabinets. You will attach doors or windows to the frame.
After you're done, there are still a few things you need to do. You will likely need to cover exposed wires and pipes. Plastic sheeting and tape are used to cover exposed wires. Also, you will need to hang mirrors or pictures. Make sure to keep your work area neat and tidy.
If you follow these steps, you'll end up with a beautiful, functional home that looks great and saves you lots of money. Now that you have a basic understanding of how to plan a house remodel, it's time to get started.