If you're planning on remodeling your bathroom, you may want to consider using a waterproof membrane. The type of substrate you plan on using will dictate the type and type of membrane you choose. Waterproof membranes are used for protecting your home from mold, mildew, and vapor damage. These types should be installed according the manufacturer's instructions. It is important to hire a professional for the installation.
Cement board is the best substrate to use for Kerdi membranes over drywall. Greenboard may be required. Traditionally, greenboard was considered the best choice for areas with high moisture levels. However, greenboard can be damaged by water over time. This can be prevented by using a waterproof membrane for greenboard.
Kerdi can also be used as a waterproof membrane. This is crucial because it can slow down the growth of mold or mildew. It can be used on a variety of surfaces including drywall and cement board. Before applying the membrane, you should thoroughly clean it. Wipe the surface clean using a damp cloth. The surface should then be sanded to a fine finish.
Once the surface is clean and sanded you can apply the membrane. The membrane should be applied using the flat side your trowel. Apply the material to your drywall back. The membrane should be cut to your desired size. It is best to leave at most 2 inches around each perimeter. Allow the material to dry after you're done.
Next, apply a layer adhesive to the surface. Allow this to dry before adding the tile. The adhesive can be added to make sure that the tiles adhere to the surface. Do not forget to seal any joints with a special sealing tape. A second layer of adhesive may also be necessary depending on how the installation is done.
Once you have applied the adhesive and let it dry, you will be able to attach the Kerdi-Membrane. Next, seal the membrane to your wall with KerdiBand. As with any other type of membrane, you should always ensure that the edges are level. If you have any issues with the application, contact a contractor for assistance.
Kerdi membranes provide strong, waterproof protection on a wide range of surfaces. You can buy them in sheets, rolls or strips. The membrane is made from non-woven polypropylene on both sides. They are easy-to-apply and provide a waterproof seal that lasts.
Schluter offers several options when it comes to bonding Kerdi membranes. Schluter-KERDI-FIX, an excellent choice for sealing the membrane, is also available. It has a silane-modified base polymer that can be used with exterior grade plywood. KERDI can be bonded to other elements of a building, such as a tiled wall or shower pan.
FAQ
What room should you remodel first?
The kitchen is the heart of any home. It's where you spend most of your time eating, cooking, entertaining, and relaxing. Start looking for ways that you can make your kitchen functional and more attractive.
The bathroom is an important part of any house. The bathroom provides privacy and comfort while you do everyday chores like brushing your teeth, shaving and bathing. You can improve the function and appearance of these rooms by adding storage, installing a bathtub instead of a bath, and replacing outdated fixtures with moderner ones.
How important it is to be pre-approved for loans?
It is important to get preapproved for a mortgage because you will know how much you can borrow. It can also help you determine your eligibility for a particular loan program.
How to sell my house fast without having to pay realtor fees?
It is important to start looking for buyers as soon as possible if you wish to quickly sell your home. This means that you should be willing to accept whatever price the buyer offers. But, you may lose potential buyers if your wait is too long.
How do I choose a good contractor?
Ask friends and family for recommendations when selecting a contractor. Check out online reviews. Check to make sure the contractor has experience with the type of construction you are looking for. Request references and make sure to verify them.
How much does it take to renovate a home?
Renovations cost typically $5,000 to $50,000. Renovations can cost homeowners anywhere from $10,000 to $20,000
How Much Does It Cost to Renovate A House
Cost of renovations depends on the material used, how large the job is and how complex it is. Wood, for example, requires additional tools such as saws and drills. Steel, however is not so dependent. The cost of renovations will vary depending on whether your contractor does all the work or you do it yourself.
The average cost of home improvement projects ranges from $1,000 to $10,000. If you plan to hire professionals, the total cost would range from $5,000 to $25,000. On the other hand, if you decide to do the entire task yourself then the total cost could reach up to $100,000.
You should know that there are many factors which determine the final cost of renovation. The cost of renovation depends on the material used (e.g. Brick vs. concrete, the project's size, the number and duration of workers, etc. When estimating the total cost for renovation, it is important to keep these factors in your mind.
Statistics
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
External Links
How To
How do I plan a whole house remodel?
Planning a home remodel takes planning and research. Before you begin your project, there are many things to think about. The first thing to do is decide what kind of home renovation you want. There are many options available, including kitchen, bathroom and bedroom. Once you have decided which category you wish to work in, you will need to determine how much money you have to spend on your project. If you don't have experience with working on houses, it's best to budget at minimum $5,000 per room. If you have some previous experience, you may be capable of getting away with a lower amount.
After you have determined how much money you have available, you can decide how big of a project you would like to undertake. If you have only enough money to remodel a small kitchen, you may not be able add new flooring, countertops, or paint the walls. You can do almost everything if you have enough cash for a full-scale kitchen renovation.
Next, you need to find a contractor who is experienced in the type project that you want. You'll get high-quality results and save yourself lots of headaches down the line. You should begin gathering materials and supplies after you've found a competent contractor. You might need to make everything from scratch depending upon the size of your project. However, there are plenty of stores that sell pre-made items so you shouldn't have too much trouble finding everything you need.
Now it's time for you to start planning. Begin by sketching out a rough plan of where furniture and appliances will be placed. Then, you'll move onto designing the layout of the rooms. It is important to allow for electrical and plumbing outlets. It is a good idea to place the most important areas nearest the front door. This will make it easier for visitors to access them. Final touches to your design include choosing the right colors and finishes. In order to avoid spending too much money, stick to neutral tones and simple designs.
Now that you're finished drawing up your plan, it's finally time to start building! It's important that you check the codes in your area before you start construction. While some cities require permits, others allow homeowners to construct without them. First, remove all walls and floors. Next, you'll need to lay plywood sheets in order to protect your new floors. Then, you'll nail or screw together pieces of wood to form the frame for your cabinets. You will attach doors or windows to the frame.
When you're done, you'll still have a few finishing touches to do. For example, you'll probably want to cover exposed pipes and wires. To do this, you'll use plastic sheeting and tape. Also, you will need to hang mirrors or pictures. Keep your work area tidy and clean at all times.
If you follow these steps, you'll end up with a beautiful, functional home that looks great and saves you lots of money. Now that you know how to plan a whole house remodeling project, you can go ahead and get started!